Email me">
Chris's Crazy Contraptions | Blind Opener

Chris's Crazy Contraptions
Blind Opener

Chris's Crazy Contraptions
Previous Up Page 2 of 2
P1010025
This is how it will fit in the box.

Mounted in Box
P1010030
I removed this area to mount the power jack for the wall wort.

Power Port Cut Out
P1010028
Here is the LED and the power jack installed in the box.

LED & Power Port
P1010032
Batteries in the box and everyting wired up.

Pieces in Place
P1010033
This is wired so that when the wall wort is plugged in, the batteries will be disconnected.

Ready to Assemble
P1010034
Here is everything in the box.

Everythig Fits
P1010027
This is the cover on the box after cutting the holes for the switch.

Finished Box
P1010040
I made a simple wooden mount from a 2x4.

Mounting Block
P1010041
This is the block mouted to the window frame. The slot is for a giant zip tie to hold the motor.

Mounted to Window
P1010003
This is the motor mounted to the window. I attached the blind rod to the unit with the screwdriver bit that came with the drill. It fit perfectly into the hollow rod.

Ready to Run
BlindLogo
I made this logo for the motor and open and close labels for the switch box.

Logo & Labels
blinds2
Here is a movie of the unit in opperation.

Working Opener Movie
Email me
www.000webhost.com