Email me">
Chris's Crazy Contraptions | SpiderHouse | The_Case_and_New_Windows

Chris's Crazy Contraptions
The_Case_and_New_Windows

Chris's Crazy Contraptions
Up Page 1 of 3 Next
IM000228
This is the Antec 300 case. This is not the case I origanally chose to use, but I got it for free with the power supply. It turned out to be a great case!

Unmodified Case
IM000231
Front USB ports, headphone and speaker jacks and a 140mm 3 speed fan on top!

Antec 300
IM000232
View of the front.

Case Front Bezel
IM000235
Rear view. Bottom mounted power supply and rear 120mm 3 speed fan.

Rear of Case
IM000237
Left side of the case with 120mm fan hole.

Left Side of Case
IM000238
View of the inside. Three external drive bays and six 3.5" internal bays.

Empty Case
IM000239
Inside rear view showing rear fan.

Rear Fan
IM000241
Fornt of the case with the bezel removed.

Case Front
IM000242
Two more 120mm front fan mounts.

Front Fan Mounts
IM000323
Taped and ready for painting.

Ready for Paint
IM000326
Used the new Krylon "Hammerd Black" to paint the case and front bezel. The picture does not do this paint justice, it is really a very nice paint.

Painted Case
IM000343
Cutting window for the top of the case. I created a pattern in Paint Shop Pro, taped it to the bottom of the acrilic and then cut with a scroll saw.

Cutting the Top Window
IM000345
This is the window after cutting.

Top Spider Fan Grill
IM000346
Just another view.

Finished Cut Out
IM000348
Using a blow drier I heated the legs and raised the spider about 1/4" higher than the plane of the window.

Raising the Spider
Email me
www.000webhost.com